Mini-Entepôts St-Jean counts on Calefactio

News, Nouvelles

25 September 2019 | Published by Annick Marseille

Plomberie Claude Boulet recently completed a 14 000 sq ft radiant heating project for Mini-Entrepôts St-Jean. The design and material supply was made in collaboration with Pier-Rick Rodier Rochefort from Empire Canada. In order to cover the whole heating demand of this surface, 12 000 ft of Calpex –R 5/8 and 7000 ft of Calpex-R ½ tubing were required, along with Caltherm Mega and Caltherm Pro distribution manifolds, in addition to the following accessories : Cal-X-Tract air separators, ΔP Pump flanges, GMP6 and Calbalance hydraulic separators.

Thanks to Mr Boulet and Empire Canada for their continuous trust in Calefactio products!

Calefactio expands its 4-in-1 hydraulic separator line with a new brass model

Published by Mylène Dumoulin - 12 May 2025

Calefactio expands its line of 4-in-1 hydraulic separators with a brand-new brass model, engineered to maximize the performance of hydronic heating systems. This compact and durable unit not only isolates the primary and secondary circuits but also efficiently removes air, micro-bubbles, dirt, and ferrous debris from the fluid. Equipped with a high-efficiency […]

Published by Mylène Dumoulin - 20 November 2025

The manual control that saves time Calefactio’s new AC24NC actuator was designed to make installers’ work easier right from the initial setup. With our new actuator, you can test your zones without even connecting it to power ⚡ — no more waiting several minutes per zone. With the new AC24NC model, you can open the […]

Published by Annick Marseille - 1 April 2019

Calefactio participated in the design of this state of the art installation that includes a few of our products. This single-home in the Laurentians is heated at first by a coil diffusing heat thought a ventilation system, and a radiant heating system supports it as secondary system. A high efficiency condensing boiler will heat the […]

Mini-Entepôts St-Jean counts on Calefactio