Pump Flange Valve – PRESS

THE ΔP VALVE IS THE ONLY ONE TO ALLOW A QUICK OVERVIEW OF THE SYSTEM

The ΔP Valve is the only one to be equipped with gage ports. The pressure differential in PSI, also know as ΔP (Delta P), is obtained by taking the readings of the gauge on each side of the pump.

The pump curves demonstrate the ΔP in head loss. In order to convert the readings of the gage in head loss, multiply the ΔP by 2.3.

Available in NPT – SWEAT – PRESS – PEX F1960 formats, with ¾”, 1”, 1 ¼”, 1 ½” or 2” connections

Documents &
specification

Instruction Brochure Submittal Pump Flange with Drain Submittal Pump Flange with no Drain Submittal 2" Pump Flange with no Drain

FEATURES

Full port brass ball valve
Rotating flange
Gauge ports on each side and drain on one side
Ball valve isolation for circulating pumps
Blowout-proof stem, packing gland and O-ring stem seal
500 CWP (Cold Working Pressure)
Threaded end complies with ANSI B1.20.1

BENEFITS

Facilitate drainage before or after the pump with the integrated drain;
Allows quick overview of the system;
Fits all high velocity pumps;
Reduce the number of joints to save you time and money;
Ensures a great seal due to its forged brass body.

THE KIT INCLUDES

One ΔP Valve with one gauge port and one drain
One ΔP Valve with two gauge ports
2 gaskets
4 nuts and 4 bolts
4 × 1⁄8” plugs (installed)

AVAILABLE IN OPTION:

0-30 PSI pressure gage 1⁄8” (#GAGE0-30BOTTOM)
0-100 PSI pressure gage 1⁄8” (#GAGE0-100BOTTOM)