New from Calefactio, CondenSAFE with pump for additional protection to the mechanical room.

Nouvelles

23 February 2021 | Published by Annick Marseille

In our mission to improve what’s best, we have taken into consideration that gravity is sometimes not on our side, so we have incorporated a water-resistant and dustproof pump into our Condensate Neutralizer to help pump neutralized water to the closest drain.
Our CondenSAFE pump is enclosed in an acid-resistant (≥ Ph3) nylon glass plastic housing, rated IP65. IP65 often referred to as International Protection Code, grades the level of protection offered by the casings against dust, and water intrusion. Our pump casing is presently UNIQUE in the market with this protection, making it ideal for dusty and humid mechanical rooms.
It is easy to install, quiet operation, and resistant to water temperatures up-to 158°F (70°C).
CondenSAFE pump Features:
 Waster resistant and dust-tight IP65 rating
 20ft of head
 Integrated check valve.
 Float for automatic-start & stop.
 7.2 ft (2.2 m) 3-Conductor Cable with a grounded 3-pin plug.

CondenSAFE neutralizer with pump (#CSNP20) can contain up to two media bags, suiting different heating device capacities.
Each media bag can treat condensate equivalent to 525 MBH (154 kWh) units, approximately 2,1 gallons (8 liters) per hour.

Calefactio media bags (#CSM2) are the only ones in the industry to have date labels, making it easy for the user to know when the media bag was installed when to change, and call for service.

Improving this unit even further, we have added an optional alarm panel to warn and prevent potential water damages to the mechanical room.
CondenSAFE neutralizer with pump comes with a 1 ft (30cm) 3-conductor cable where the alarm panel can easily be installed. Powered by 120V and with a 9V battery provides backup during power outages.

This multipurpose alarm (#CAL-AL120) can be used on a variety of applications i.e., septic tanks, sumps, holding tanks, pump chambers, water tanks, etc.
CondenSAFE with pump offers additional protection to any mechanical room.
For more information on this product visit our website site/condensafe.
For more information on this product press here
To locate your closest Calefactio distributor press here or send us an email @ info@calefactio.com

New Tankless Water Heater Valve Kit ¾″ PRESS design

Published by Mylène Dumoulin - 1 April 2024

Calefactio adds a ¾” PRESS connection Tankless Water Heater Valve Kit including a 150 PSI pressure relief valve to its line. Compact and easy to install, each Calefactio Tankless Water Heater Valve kits includes two isolation valves with drain and a 150 PSI pressure relief valve. Some kits are also offered with a 30 PSI […]

Published by Mylène Dumoulin - 10 January 2024

In addition to isolating the primary circuit from the secondary circuit for heating and snow melting applications to prevent variations in flow rates and temperature, the new Calbalance 4-in-1 hydraulic separators from Calefactio separate water, air, dirt and ferrous debris. The coalescence process produced by the media allows air and micro-bubbles to fuse and then […]

Published by Annick Marseille - 9 September 2019

Catherine and Jean-Philippe are the 3rd entrepreneur generation of their family. Their business sense and their complementary strengths allow them to skillfully manage their business. As Catherine is concentrating on the administration and supply chain side, Jean-Philippe focuses on sales management. Surrounded by their team, they develop a catalog containing over 100 products for which […]

New from Calefactio, CondenSAFE with pump for additional protection to the mechanical room.