Back to the range

CALBALANCE NPT – 2 ZONES

Hydraulic separators are used to isolate primary circuits (boiler) from secondary circuits (application/heat transmitter) as much for flow than for charge loss. The Calbalance 2 zones allows to connect two zones directly. The size of hydraulic separators should be determined by the maximal inlet flow. The information used must be the highest, no matter if it’s from the primary or secondary circuit.

TECHNICAL SPECIFICATIONS

  • Serves two zones
  • Equipped with Calvent automatic air vent (#CV050)
  • Separate air and dirt
  • Sffered with drain valve
  • Housing in carbonized steel
  • Provided with wall bracket
  • Maximum operating pressure 150 psi
  • Maximum operating temperature 100°C
  • Adapted fluids: water and glycol solutions at 50%

BENEFITS

  • ½” FNPT thermometer port
  • Eliminate the need to install automatic air
  • vent and air & dirt separator
  • Simple to install
  • Easy maintenance
  • Minimize energy consumption because the pumps will only work for the required zones

Features CALBALANCE NPT – 2 ZONES

Maximum operation pressure 10 bar/150 psi
Operation temperature range 100°C/212°F

MODELS

Model Connection Flow rate GPM Flow rate m³/h
CB1002Z 1'' 100 2,5
CB1252Z 1 1/4'' 18 4

NEW !

Hydronic Radiant Floor Heating & Snow Melting