Back to product range

Calbalance without flange

Hydraulic separators are used to isolate primary circuits (boiler) from secondary circuits (application/heat transmitter) as much for flow than for charge loss. The size of hydraulic separators should be determined by the maximal inlet flow. The information used must be the highest, no matter if it’s from the primary or secondary circuit.

Submittal &

Literature Instructions


• Equipped with Calvent automatic air vent (#CV050)
• Separate air and dirt
• Offered with drain valve
• Zinc plated steel housing
• Provided with wall bracket
• Maximum operating pressure 150 psi
• Maximum operating temperature 100°C
• Adapted fluids: water and glycol solutions at 50%
Optional preformed insulation made of polyurethane to minimize heat loss


• ½” FNPT thermometer port
• Eliminate the need to install automatic air vent and air & dirt separator
• Simple to install
• Easy maintenance
• Minimize energy consumption because the pumps will only work for the required zones

Features Calbalance without flange


Maximum operation pressure 10 bar/150 psi
Operation temperature range 100°C/212°F


Model Connection Flow rate GPM Flow rate m³/h
CB100 1 11 2,5
CB125 18 4
CB150 26 6
CB200 2 39 9